The first step to using a LoveHandle is to attach it to the desired device.

This is accomplished in one of two methods:

Method 1 - Application onto glass phones (ie. iPhone 8/X/11, Samsung 10/10+) silicone cases, soft rubber cases, and leather cases.

For these applications the desired location must first be cleaned with the included alcohol wipe. Once dry and clean, the clear 3M adapter sticker is applied in the desired location. Then peel the while backer paper from the 3M no-residue adhesive attached to the bottom of the LoveHandle grip and place the grip firmly centered onto the clear adapter sticker. Continue pressing firmly, especially along the edges, for 30 seconds to ensure a complete bond. Wait 5 minutes before use. Test bond over a safe area.

Missing Your Adapter ?

Order One Here FREE For LoveHandle & LoveHandle XL

lovehandle.com/adapter

Method 2 - This second method is for all other phones and cases than the ones listed above in Method 1.
First, the desired location must be cleaned with the included alcohol wipe and allowed to completely dry. Then, peel the while backer paper from the 3M no-residue adhesive attached to the bottom of the LoveHandle grip and place the grip firmly centered onto the device or case. Continue pressing firmly, especially along the edges, for 30 seconds to ensure a complete bond. Wait 5 minutes before use. Test bond over a safe area.

The first step to using a LoveHandle is to attach it to the desired device.

This is accomplished in one of two methods:

Missing Your Adapter ?

Order One Here FREE For LoveHandle & LoveHandle XL

Apply LoveHandle To Phone

Apply LoveHandle To Rubber Case ( Otterbox )